Palm Fiber Dryer
Palm fiber, also known as oil palm fiber is a waste used in the production of palm oil. After being processed by a palm fiber dryer, the product has a moisture content of less than 15%, impurities of less than 3%, and oil content of less than 5%. The fiber is clean, beautiful in color, and free from mold spots.
- Output：0.5-10t/h
- Power：5.5-55KW
- Input moisture：30%
- Output moisture：15%(adjustable)
Product Introduction
Palm fiber, also known as oil palm fiber is a waste used in the production of palm oil. After being processed by a palm fiber dryer, the product has a moisture content of less than 15%, impurities of less than 3%, and oil content of less than 5%. The fiber is clean, beautiful in color, and free from mold spots.
Applicable Material
Low drying cost, high cleanliness, large output and high efficiency
Palm fiber dryer are widely used in palm fiber, coconut fiber, coconut bran, etc.
Product Features
- 01
-
Good sealing and high thermal efficiency
Inlet and outlet head adopts special seal to effectively reduce heat loss.
- 02
-
Wide application range, large processing capacity
It can be dried upstream or upstream. Therefore, it can be applied to the drying of certain heat-sensitive materials. The drying treatment of granular, fibrous, powdery and other loose materials with different specific gravity, particle size and water content can achieve good dehydration and drying effect.
- 03
-
High degree of automation, continuous production
The dehydration and drying time can be adjusted according to the material properties and moisture requirements.
- 04
-
Seiko manufacturing, long service life
High quality stainless steel plate refined, wear-resistant and durable.
Working Principle
1. During the drying process of the palm fiber dryer, the palm fiber is first added to the silo by the forklift, and then the palm fiber are evenly sent to the dryer by the belt conveyor for drying.
2. Under the turning of the evenly distributed shovel plates in the drying drum, they are evenly dispersed and fully contacted with hot air, which accelerates the drying, heat and mass transfer of material and evaporates water. The palm fiber dryer produced by our company has a sealed structure, which can reduce heat loss and improve thermal efficiency.
3. The dried material flow into the elevator from the discharge hopper, and enter the transfer bin through the elevator. The material enters the granulator machine through the transfer bin, and is pressed into biomass particles, and then packed into bags after being cooled by the cooler. , sent to the designated place for storage.
4. The upper part of the unloading hopper is the dust during the unloading process. After being treated by the dust removal system, it can achieve the purpose of environmental protection.
Technical Parameter
| product standard（m) | Capacity（t/h) | Feed moisture（%） | Final Moisture(%) | Power(KW) |
|---|---|---|---|---|
| 0.8*8 | 0.5-3 | 30% | 15% | 3KW |
| 1*10 | 1-5 | 30% | 15% | 5.5KW |
| 1.2*12 | 2-8 | 30% | 15% | 11KW |
| 1.6*16 | 6-10 | 30% | 15% | 15KW |
| 1.8*16 | 8-15 | 30% | 15% | 18.5KW |
| 2*18 | 10-20 | 30% | 15% | 22KW |
| 2.2*18 | 12-25 | 30% | 15% | 30KW |
| 2.4*22 | 15-30 | 30% | 15% | 45KW |
| 2.6*24 | 18-35 | 30% | 15% | 55KW |
Company Profile
